Extra core thickness
Our core comes standard in .50, 1, 2, 4, 6,8 and 12 inches thick. Any thickness of table can be made by laminating multiple cores. Please consult the factory for more options.
A very effective way of isolating a breadboard or small table from another table is by use of an air bladder. The air bladder is inflated and placed on a bench or other table and the breadboard (BB) placed on top. For years, it has been common to use an inner tube from a bicycle or car, and it provides isolation as good as or better than any other passive method. We offer a similar setup composed of an air bladder matched to the board size and an air pump.
Any size or shape hole can be placed through the board for bringing laser beams to the top surface or for mounting instruments flush. The honeycomb core is sealed around the through holes, allowing a clean environment for your application.
We offer two types of Vibration Isolation Legs. The standard air spring has a load range of 50 Lb's up to 400Lb's per leg. The heavy duty air springs load range is 150 Lb's up to 1200Lb's per leg. Click here for more info.
Options for your new Breadboard
Allows the breadboard to tilt up to a 45 degree angle
Part number: CTP-100
Our support posts are 1.5" round steel posts with a mounting flange at the bottom. The top has a 1/4-20 tapped hole. Attach the support post to your breadboard with a 1/4-20 threaded stud and then mount the flange to a table.
Breadboard leveling option:
Allows critical leveling adjustment of breadboard.
Each foot acts independent of the others allowing overall adjustment for balancing the Height of the breadboard.
The size is limited only to your imagination. Custom sizes are available for the same price as the next larger standard size.
Custom hole patterns
We can build your board to your specifications. Additional Holes, Grids, Bolt Hole Circles and Uniform Patterns are also available.
Breadboard/Table Supports
We offer Table Stands as well as Non-isolating table legs.
Leveling Support Posts
Our leveling support posts are an ideal solution when stacking breadboards or using a breadboard on an irregular table top surface. Height adjustable with a flexible foot.
(set of 4 required)
6” high version shown
Laser Ports/Through holes
Vibration Isolation
Tilt platform
Support Posts
Part number:
- SP-24 = 24" Height
- SP-12 = 12" Height
- SP-6 = 6" Height
- SP-4 = 4" Height
- SP-X = Special Height available
SP-4-E = 4" Extenders, no mounting flange with 1/4-20 threaded hole at each end
Custom sizes and shapes
Email a drawing of your custom shape for a quote.
Part number: Bladder with air pump
VBB-PS 12" bladder for 18-28" BB's
VBB-PL 24" bladder for 30"+ BB's
Part number: Bladder only
VBB-S 12" bladder
VBB-L 24" bladder
(2)VBB’s shown in photo
A grid can be placed on the Top and Bottom of the Breadboard. The Bottom Grid can be same as Top, or can vary with a Custom Pattern or Tapped Hole size. Border on the Bottom can be changed also.
Can be offered with Right Angle Brackets for Table top use or Self Supporting with Vibration Isolation Canisters.
Movable Optical Breadboards
Wheeled Carts and other support systems with casters are available for Classroom or Lab applications. Your experiment can be moved on site as needed, then pushed into the storage closet until the next need arises. Available for most Optical Breadboards.
Innovative Products for the Optical Laboratory
VERE